|
|
 |
|
|
|
|
for Carbon steel and 490N/mm©üHigh tensile strength steel |
|
|
Standard |
Application |
 |
 |
E61T-G |
YFW-A430R |
K-61T is designed for MAG welding of POS-AG steel and low silicon steel for single and multi-pass applications |
E71T-1 |
YFW-C50DR |
Butt and fillet welding of carbon steel for machineries, cars, shipbuilding, bridges, etc.
|
E71T-1 |
YFW-C50DR |
Butt and fillet welding of carbon steel for machineries, cars, shipbuilding, bridges, etc. |
E71T-1M |
YFW-A50DR |
All position welding of machineries, shipbuilding, bridges, vehicles using carbon steel. |
E70T-5M |
YFW-A502B |
Butt and fillet welding of fabricatins such as bridges and structures |
E70T-1/-1M |
YFW-C50DM |
Flat and H-fillet welding of medium and heavy thick plate with higher deposition rate as shipbuildings, steel structures and bridges, etc |
E70T-1 |
YFW-C50DM |
For flat or horizontal fillet MAG welding mild and 490N/§± high tensile steel K-70ST is most suitable for welding of inorganic zinc-rich primer coated steels,often used in machinery, steel fabricatins and construction industries |
E70C-3C |
YFW-C50DM |
Butt and H-fillet welding of steel structures such as construction machines, industrial machinery and buildings, etc. |
E70C-3M |
YFW-A50DM |
Butt and H-fillet welding of steel structures such as construction machines, industrial machinery and building, etc. |
E70C-6M |
YFW-A502M |
Butt and H-fillet welding of steel structures as construction machines, industrial machinery and building, etc. |
E70T-1 |
YFW C50DM |
Flat and H-filet welding of medium and heavy thick plate with higher deposition rate as shipbuildings, steel structures and bridges, etc |
E70T-1 |
YFW C50DM |
For flat or horizontal fillet (tandem) MAG welding of mild and 490N/§± high tensile steel. KX-200H is most suitable for filet welding of inorganic zinc-rich primer coasted steels, often used in the machinery, steel fabrication and bridge construction industries. Welding speed is very high(Twin-Tandem 1000mm/min |
|
|
|
|
|
|
Flux Cored arc welding wires for self shield |
|
|
Standard |
Application |
 |
 |
E71T-10 |
YFW-S50GB |
Lap and fillet welding for single pass applications |
E71T-11 |
YFW-S50GB |
Butt and fillet welding for single and multi-pass |
E71T-GS |
YFW-S50GB |
Lap and fillet welding on thin gauge galvanized and carbon steel in all welding positions |
|
|
|
|
|
|
Flux cored arc welding wires for high tensile strength steel |
|
|
Standard |
Application |
 |
 |
E81T1-Ni1 |
YFW-C602R |
Flat and fillet welding of medium and heavy thick plate such as shipbuildings, steel structures and bridges, etc.
|
E81T1-Ni2 |
- |
For welding of 600N/§± class aluminium-killed steel for low-temperature service. The weld metal about 2.0% Ni and good impact value(as-welded) at low temperatures down to -40¡É |
E80T1-Ni1 |
YFW-C602M |
For flat or horizontal fillet(tandem) MAG welding of mild and 590N/§± high tensile steel. KX-300 is recommend for petro-chemical applications, the machinery, steel fabrications and bridge construction indusstries. The wire is intended for use with 100% CO©üfor shieling.
|
E110T1-K3 |
- |
For high strength steel application as HY 80Grade and ASTM A514/A517/A710, It si well suited for joining high tensile steels that will be used in used in al low temperature environment.
|
|
|
|
|
|
|
Flux cored Arc welding wires for Atmospheric corrosion resisting steel |
|
|
Standard |
Application |
 |
 |
E81T1-W2 |
YFA-50W |
Butt and fillet welding of 490N/§± class high tensile strength weather-proof steel(which is used normally without painting) for shipbuilding |
E81T1-W2 |
YFA-58W |
Butt and fillet welding of high tensile strength weather-proof steel, for example A-242 or A-588, which is used normally without painting, for shipbuildings and bridges, etc.
|
|
|
|
|
|
|
Flux Cored Arc welding Wires for low temperature service steel |
|
|
Standard |
Application |
 |
 |
E71T-1/9J |
YFW-C504R |
K-71UT is designed for welding of 490MPa low temperature steels with slow freezing slag system. It can be used in a variety of applications including railcar, automotive, machinery, shipbuilding, bridges, heavy equipment etc.
|
E80T1-K2 |
YFL-C506M |
K-80TK2 is designed for welding of 590MPa high tensile steel for low temperature service. Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc.
|
E81T1-K2 |
YFL-C506R |
K-81TK2 is designed for welding of 590MPa high tensile steel for low temperature service. Butt and fillet MAG welding of offshore structures, LNG and LPG carriers and storage tank, etc.
|
|
|
|
|
|
|
Flux cored arc welding wires for Heat-resisting steel |
|
|
Standard |
Application |
 |
 |
E81T1-A1 |
YFM-C |
K-81TA1 is formulated for butt and fillet welding of 0.5%Mo steels used for high pressure vessels, oil refining industries, steam pipes of boilers etc.
|
E81T1-B2 |
YF1CM-C |
K-81TB2 is formulated for butt and fillet welding of 1.25%Cr-0.5%Mo steels used for high pressure vessels, oil refining industries, steam pipes of boilers etc.
|
E91T1-B3 |
YF2CM-C |
K-91TB3 is formulated for butt and fillet welding of 2.25%Cr-1.0%Mo steels used for high pressure vessels, oil refining industries, steam pipes of boilers etc |
|
|
|
|
|
|
Flux Cored Arc Welding wires for stainless steel |
|
|
Standard |
Application |
 |
 |
E308T0-1/-4 |
YF308C |
K-308T is formulated for MAG welding of 18%Cr-8%Ni stainless steels.It is designed for operation primarily in the flat position and for weldling horizontal fillet welds
|
E308LT1-1/-4 |
YF308LC |
K-308LT is designed for MAG welding of low carbon 18%Cr-8%Ni stainless steels. (AISI 304, 304L, 304LN, ASTM A157 Gr. C9; A320 Gr. B8C or D)
|
E309T0-1/-4 |
YF309C |
K-309T is formulated for MAG welding of 22%Cr-12%Ni stainless steels. Typical applications is for welding of dissimilar steels, such as 304 to mild steel or low alloy steels |
E309LT1-1/-4 |
YF309LC |
K-309LT is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steels. Dissimilar joint welds ; of and between high-strength, mild steels and low-alloyed QT-steels, stainless, ferritic Cr- and austenitic Cr-Ni-steels, manganese steels. Cladding ; for the first layer of corrosion resistant weld claddings on ferritic-perlitic steels in boiler and pressure vessel parts up to fine-grained steel S500N |
EC309L |
YF309LG |
K-309LMT is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steels.It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange. (AISI 409, 436, cladding and dissimilar joint welds |
E309LMoT1-1 |
YF309MoLC |
K-309MoLT is designed for MAG welding of low carbon 22%Cr-12%Ni-Mo stainless steels. Dissimilar joint welds ; of and between high-strength, mild steels and low-alloyed QT-steels, stainless, ferritic Cr- and austenitic Cr-Nisteels, manganese steels. Cladding ; for the first layer of corrosion resistant weld claddings on ferritic-perlitic steels in boiler and pressure vessel parts up to fine-grained steel S500N. |
E312T1-1 |
- |
K-312T is formulated for MAG welding of 30%Cr-9%Ni stainless steels. It is used for joining dissimilar steels, steels with reduced weldability and buffer layers prior to hardfacing (rolls, forging dies, hotwork tools, dies for plastics and so on)
|
E316T0-1/-4 |
YF316C |
K-316T is formulated for MAG welding of 18%Cr-12%Ni-2%Mo stainless steels where increased resistance to pitting corrosion is required (AISI 316, 316L)
|
E316LT1-1/-4 |
YF316LC |
K-316LT is designed for MAG welding of low carbon 18%Cr-12%Ni-2%Mo stainless steels. This wire has low carbon content which gives good resistance to most types of corrosion of the weld metal (AISI 316L, 316Ti, 316Cb |
E317LT1-1 |
YF317LC |
K-317LT is designed for MAG welding of low carbon 19%Cr-13%Ni-3%Mo stainless steels. The principal area of plication is process and chemical plant, shipbuilding as well as clear plant industries.
|
E2209T1-1/4 |
- |
K-329T is formulated for MAG welding of 23%Cr-9%Ni-3%Mo duplex stainless steels.The principal area of application is chemical plant and shipbuilding as well as nuclear plant industries |
E347T1-1 |
YF347C |
K-347T is formulated for MAG welding of 18%Cr-8%Ni-Nb stainless steels |
EC409 |
- |
K-409TiT is developed to meet the needs of the auto-motive exhaust fabricators that desired a metal cored wire. It excels in the pulsed GMAW mode |
E410T0-1/-4 |
YF 410C |
K-409TiT is developed to meet the needs of the auto-motive exhaust fabricators that desired a metal cored wire. It excels in the pulsed GMAW mode |
E410NiMoT0-4 |
- |
K-430T is designed for MAG welding of ferrite stainless alloys of the 17%Cr-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange, etc.
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|